|

Square Thin Nuts

$1.15 - $1.95

Minimum order : 350 items

Customization as per requiments


Square Thin Nuts - Specification

Specification Details
Size5 * 5
TypeBolt, Nut, Screw, Washer, Rivet, Threaded Rod, Studs, Coated, Nails, Custom Fasteners
StandardDin, Iso, Jis, Gb, Is, Bs, Astm
Length3 mm to 10 mm
MaterialStainless Steel, Monel, Inconel, Incoloy, Hastelloy, Nickel, Silicon Bronze, Phosphor Bronze

Square Thin Nuts Manufacturer in India

Delta Fitt Inc is a trusted Square Thin Nuts Manufacturer offering fastening components made for compact spaces and low load applications. These nuts are shaped with four sides instead of six and are thinner than standard hex nuts, making them ideal for tight clearances where height is limited. They are often used as jam nuts to lock other nuts in place or in equipment where thread engagement is short but reliable holding is still required. Their square profile provides better grip with hand tools and is easier to seat against flat surfaces.

Square thin nuts are popular in B2B machinery maintenance, appliance assembly, and architectural hardware where minimal space is available. Their flat design helps reduce stacking height in assemblies without sacrificing basic strength. They are fabricated either out of carbon steel, stainless steel, or brass and come in many different sizes and finishes to meet a particular operating environment. They are also easier to align using their simple geometry in installations to aid high speed and uniformity in fastening of equipment builds.


Type of Sub-products

Stainless Steel Square Thin Nuts

Stainless Steel Square Thin Nuts

Resistant to corrosion and used in electrical fixtures, lightweight equipment, and marine setups.

Zinc Plated Square Thin Nuts

Zinc Plated Square Thin Nuts

Economical and rust protected solution for dry or moderately corrosive conditions.


Frequently Asked Questions

Where are thinsquare nuts used?

Square thinner nuts are employed in machineries, brackets, electrical panels and any rig where space is limited vertically. They are highly suitable when used in close joints and in secondary lock nuts. Such nuts are common in tools frames and equipment where every mm counts. They provide a steady hold alongside maintaining the assembly at thin profiles. They are also perfect in repair and maintenance. They are also easy to handle manually because of their shape.

What are the differences between square thin nuts and normal nuts?

The principle distinction is of shape and thickness. Thin nut shaped squares are also flatter and have four sides as compared to six. This enables it to have greater access to flat surfaces and greater hold with simple tools. They are applied where you need room to save space or you need to back up another nut. The regular nuts are girthier and have increased loading capacity. Square thin nuts are specialised to work in tight places. They also tend to round off less when tightening is done due to their shape.

Republicans Are square thin nuts strong enough to be used structurally?

Structural connections joined using square thin nuts are not meant to support high loads. They work best on a light to medium duty fastening and are space limited. Although they are manufactured using hard materials, their weaker thickness level makes them less good as compared to full size nuts. They form the best fitting at adjustment points, covers, light brackets and also locking of other nuts. The heavier hex or square nuts must be utilized as structural loads carry more weight. The type of nut should always be in line with the load level of your application.


Countries we Export - Square Thin Nuts

India


Cities We Supply - Square Thin Nuts

Lucknow

Mumbai

Nashik

Pune

Rajkot

Moradabad

Angul

Rudrapur

Hosdurg

Gandhinagar

Rajahmundry

Durgapur

Bharuch

Panipat


People also viewed

Supplier's popular products