This comprehensive ms pipe c class weight chart in kg, mm, pdf enables construction professionals to determine accurate material requirements for structural applications. Our detailed specifications support precise project planning while facilitating efficient procurement through modern b2b portal systems.
Comprehensive MS Pipe C Class Weight Chart in KG and MM Specifications
Complete MS Pipe C Class Weight Chart
Nominal Bore (MM) | Outer Diameter (MM) | Wall Thickness (MM) | Weight per Meter (KG) | Weight per 6M Length (KG) | Internal Diameter (MM) | Cross-sectional Area (cm²) |
15 (1/2") | 21.3 | 2.65 | 1.27 | 7.62 | 15.90 | 1.99 |
20 (3/4") | 26.9 | 2.87 | 1.69 | 10.14 | 21.16 | 3.52 |
25 (1") | 33.7 | 3.38 | 2.41 | 14.46 | 26.94 | 5.70 |
32 (1.25") | 42.4 | 3.56 | 3.24 | 19.44 | 35.28 | 9.78 |
40 (1.5") | 48.3 | 3.68 | 3.85 | 23.10 | 40.94 | 13.17 |
50 (2") | 60.3 | 3.91 | 5.11 | 30.66 | 52.48 | 21.65 |
65 (2.5") | 76.1 | 4.05 | 6.78 | 40.68 | 68.00 | 36.32 |
80 (3") | 88.9 | 4.05 | 7.95 | 47.70 | 80.80 | 51.29 |
100 (4") | 114.3 | 4.50 | 11.41 | 68.46 | 105.30 | 87.16 |
125 (5") | 139.7 | 4.85 | 15.06 | 90.36 | 130.00 | 132.73 |
150 (6") | 168.3 | 4.85 | 18.16 | 108.96 | 158.60 | 197.62 |
200 (8") | 219.1 | 5.40 | 26.62 | 159.72 | 208.30 | 340.85 |
250 (10") | 273.0 | 6.35 | 39.14 | 234.84 | 260.30 | 532.46 |
300 (12") | 323.9 | 6.35 | 46.72 | 280.32 | 311.20 | 760.78 |
MS Pipe C Class Material Specifications
Chemical Composition Standards
Element | Percentage Range | Standard Specification | Quality Grade |
Carbon (C) | 0.15 - 0.25% | IS 1239 Part 1 | C Class Medium |
Manganese (Mn) | 0.30 - 0.70% | IS 1239 Part 1 | Standard Grade |
Phosphorus (P) | Max 0.050% | IS 1239 Part 1 | Quality Control |
Sulfur (S) | Max 0.050% | IS 1239 Part 1 | Purity Standard |
Silicon (Si) | 0.10 - 0.40% | IS 1239 Part 1 | Structural Grade |
Mechanical Properties
Property | Value Range | Test Method | Application Standard |
Tensile Strength | 330-370 N/mm² | IS 1608 | Structural Applications |
Yield Strength | 205 N/mm² (Min) | IS 1608 | Load Bearing Capacity |
Elongation | 23% (Min) | IS 1608 | Ductility Measurement |
Hardness | 67 HRB (Max) | IS 1608 | Surface Durability |
Application-Specific Weight Calculations
Water Supply Systems
Pipe Size | Application Type | Standard Length | Total Weight (KG) | Installation Factor |
25mm | Residential Supply | 100 meters | 241.0 | 1.15x |
50mm | Commercial Supply | 100 meters | 511.0 | 1.20x |
100mm | Industrial Supply | 100 meters | 1141.0 | 1.25x |
150mm | Municipal Supply | 100 meters | 1816.0 | 1.30x |
Structural Framework Applications
Configuration | Pipe Combination | Total Weight per Unit | Load Capacity | Safety Factor |
Column Support | 150mm + 100mm | 29.57 KG/meter | 85 kN | 2.5 |
Beam Framework | 100mm + 80mm | 19.36 KG/meter | 62 kN | 2.2 |
Truss Assembly | 80mm + 65mm | 14.73 KG/meter | 45 kN | 2.0 |
Quality Assurance and Testing Standards
Hydrostatic Testing Requirements
MS pipe c class undergoes rigorous pressure testing to ensure structural integrity. Standard test pressures range from 2.5 to 4.0 MPa depending on nominal bore specifications, with testing duration maintained for minimum 10 seconds per IS 1239 standards.
Surface Treatment Specifications
Treatment Type | Application Method | Coverage (g/m²) | Corrosion Resistance |
Hot Dip Galvanizing | Immersion Process | 610 minimum | 15-20 years |
Zinc Coating | Electroplating | 275 minimum | 8-12 years |
Primer Coating | Spray Application | 125 minimum | 5-8 years |